Updated November 2026

Yes, you can put solar panels on a concrete tile roof. Most installers use hook-style or tile-replacement mounts that attach to the roof rafters under the tiles, and the panels are then fixed to rails above them. The key is making sure the roof structure can carry the load and that the mounting points seal properly against water.

Why concrete tile roofs need a different approach

Concrete tiles are heavy, usually several times the weight of asphalt shingles per square. That weight is already carried by the rafters, so the question is whether there is room for the added load of racking and panels. Concrete tiles also sit in an interlocking pattern, and you cannot simply drill through them without risking cracks or leaks.

Shopping for one? See our guide: Top 3 Solar Panels as Roof Shingles Compared for Homeowners.

Because of this, installers avoid screwing into the tiles themselves. Instead, they lift or remove specific tiles, fix a hook or bracket to a rafter, and slip the tile back around it. Some systems use replacement tiles with a built-in flashing to keep water out.

Factors that decide whether your roof is a good fit

Several things determine how easy the job will be and whether it is worth doing:

  • Rafter size and spacing. Standard rafters spaced 16 inches on center make attachment straightforward. Wider spacing may need additional blocking.
  • Roof age and condition. Cracked, mossy or loose tiles should be repaired before panels go on. Mounting over a failing roof means a second disruption later.
  • Pitch and orientation. South-facing slopes in the Northern Hemisphere usually produce the most energy. A steep pitch can also simplify water runoff around the mounts.
  • Local wind and snow loads. Your building department or a structural engineer can confirm whether the rafters and fasteners meet the design loads for your area.

What to do before you install

  1. Get a roof inspection from a qualified roofer or structural professional to check rafter condition and tile health.
  2. Measure rafter spacing from the attic, marking the centers with a stud finder or by checking nail lines.
  3. Ask your installer for a load calculation and confirm the mounting system is listed for concrete tile.
  4. Confirm the flashing method. Interlocking tile hooks should include a seal that matches the tile profile.
  5. Check local permit requirements and your utility’s interconnection rules before ordering equipment.

If you plan to handle any part of the work yourself, consult a licensed professional first. Roof work and high-voltage wiring carry real fall and shock risks.

What we’d use

Hook-style rail mounts designed for interlocking tile are the most common choice for this roof type. Look for a kit that lists your tile profile and includes stainless or coated hardware: View on Amazon. A set of replacement flashing pieces matched to your tile shape is also useful: View on Amazon.

FAQ

Will mounting panels on concrete tiles crack the roof?

It can if tiles are drilled or stepped on carelessly. Proper tile-hook systems avoid drilling through the tile and lift only the tiles needed for each attachment point.

Do I need a stronger roof frame for concrete tiles?

Not always, but you should confirm. Concrete tiles add significant dead load, so a structural check that includes the panels is wise, especially in snow or wind zones.

Can I install solar on a cracked concrete tile roof?

Repair or replace damaged tiles first. Mounting over a roof that is already failing can lead to leaks and costly rework later.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our home solar guides, checking product details against manufacturer specifications and owner feedback.