Updated November 2026
Net metering is the billing arrangement that lets a home with a solar system send extra electricity to the grid and receive credit for it. In a what is net metering in solar system setup, your meter runs both ways: it counts the power you pull from the utility and the power your panels push back. This guide explains how that works, what affects your credits, and what to check before you rely on it.
How Net Metering Works in a Solar System
Your solar panels produce direct current, which an inverter converts to the alternating current your appliances use. During the day, your home uses some of that power and the rest flows out to the grid. A bidirectional meter records both directions. At the end of the billing period, the utility compares what you exported with what you imported and bills you only for the net difference.
Shopping for one? See our guide: 6 Best On-Grid Solar System Without Net Metering Picks for 2026.
If you export more than you import, the surplus usually rolls forward as a credit on your next bill. The exact treatment depends on your utility and state, so the rules on your local tariff are what count.
What Determines How Much You Save
Several factors decide how valuable your credits are. Your system size and local sunlight drive how much you export. The rate structure matters just as much: some utilities credit exported power at the full retail rate, while others credit it at a lower avoided-cost rate. Time-of-use pricing can also change the value, since power sent back at peak hours may be worth more than power sent back at midday.
| Factor | Why it matters |
|---|---|
| Export credit rate | Determines how much each exported kWh offsets your bill |
| Billing period | Shows whether monthly or annual true-up applies |
| Rollover rules | Explains what happens to unused credits |
| Interconnection limits | Caps the system size your utility will approve |
Steps to Get Started with Net Metering
- Contact your utility and ask whether net metering is available for your rate plan.
- Request the current net metering tariff and read the credit and rollover terms.
- Submit an interconnection application with your system design and equipment specs.
- Wait for approval before energizing the system. Installing before approval can lead to rejection.
- Confirm that your utility has installed a bidirectional meter and that your bills show import and export readings.
Net Metering Checklist for Homeowners
- Confirm your utility offers net metering for residential systems.
- Check whether credits are applied monthly or annually.
- Find out how unused credits roll over and whether they expire.
- Verify the system size limit set by your utility.
- Keep copies of your interconnection approval and tariff documents.
Common Mistakes to Avoid
- Assuming all exported power is credited at the same rate. Check your tariff.
- Sizing the system based on the wrong usage figures. Use twelve months of bills.
- Ignoring rule changes. Many states have revised net metering policies in recent years.
- Skipping the interconnection step, which can delay or void your approval.
FAQ
Does net metering mean I get paid in cash for my solar power?
Not always. Most arrangements credit your account against future bills, and some utilities pay out any leftover balance at year end or at a lower rate.
Do I still need a utility connection with net metering?
Yes. Net metering works through the grid, so your home stays connected, and the utility is what records your exports and imports.
Can net metering rules change after I install my system?
They can. Many programs have grandfathering provisions, but this varies by state and utility, so ask your utility how changes would affect your existing system.
Conclusion
Net metering lets your solar system offset your electricity use by crediting the power you send to the grid. Your savings depend on your local credit rate, rollover rules and system size. Read your utility’s tariff carefully, and consider consulting a licensed solar installer or your utility’s customer team before committing.
