Updated November 2026
What is net metering and gross metering in solar? Both are billing methods that decide how your utility credits or pays you for electricity your panels send back to the grid. Net metering nets your exports against the power you pull from the grid, while gross metering pays for every kilowatt-hour you export separately. This guide explains how each works so you can tell which one applies to your home and what it means for your bill.
How Net Metering Works
Under net metering, your meter runs both directions. When your panels produce more than your home uses, the extra flows to the grid and the meter spins backward. At night or on cloudy days, when you draw power from the grid, the meter runs forward again. The utility subtracts exports from imports and bills you only for the net difference.
Shopping for one? See our guide: Net and Gross Metering Solar (2026): Which Should You Choose?.
If you export 500 kWh in a month and import 700 kWh, you pay for 200 kWh. Many utilities also carry unused credits forward, so a surplus in spring can offset winter usage. Read the fine print, though: some utilities pay for leftover credits at a lower rate or reset them annually.
How Gross Metering Works
Gross metering uses two separate measurements. One meter records all the electricity you import from the grid, and another records all the electricity your system exports. You buy everything you use at the retail rate, and the utility pays you for every kilowatt-hour you send back, usually at a different rate.
Because the two flows are not netted against each other, gross metering can work out well if your export rate is high and your home uses most of its own solar during the day. Before choosing a setup, ask your utility whether gross metering is offered and what export rate applies.
Net Metering vs Gross Metering: Key Differences
The main difference is how exports are valued. Net metering offsets your bill directly. Gross metering pays you a separate rate for exports, and your imports are billed in full.
| Factor | Net Metering | Gross Metering |
|---|---|---|
| Meters | One bidirectional meter | Two separate meters or channels |
| Export value | Offsets your own usage at retail-equivalent value | Paid at a set export rate |
| Best fit | Homes that export and import in roughly balanced amounts | Homes with high daytime self-use and a favorable export rate |
| Credit carryover | Often rolls forward, depending on the utility | Not applicable; exports are paid as they occur |
Checklist: Figuring Out Which Applies to Your Home
- Pull 12 months of your utility bills and note your total import and export kWh.
- Ask your utility whether it offers net metering, gross metering or both for residential solar.
- Find the export rate under gross metering and compare it with your retail rate.
- Check whether unused net credits roll over and whether any are paid out annually.
- Confirm any interconnection or meter-upgrade requirements with your installer.
Common Mistakes
- Assuming net metering always means a zero bill. Fixed monthly charges still apply in most areas.
- Ignoring export rates. Under gross metering, a low export rate can make your system less valuable than expected.
- Overlooking policy changes. Many utilities revise their export terms, so confirm current rules before signing a contract.
- Sizing the system only for the bill. Match capacity to your daytime usage pattern, not just your annual total.
Recommended Gear
A home energy monitor helps you see how much your panels export and import hour by hour, which is the data you need to compare billing options. Look for a unit that reports circuit-level or whole-home usage.
A kilowatt-hour meter with a display is useful for checking individual appliances and confirming how much of your load your panels are covering during the day.
FAQ
Is net metering better than gross metering?
Not always. Net metering tends to suit homes whose exports and imports are fairly balanced, while gross metering can pay more when your home uses most of its solar power during the day and the export rate is generous.
Can I switch between net and gross metering?
It depends on your utility and state. Some allow changes at certain intervals, while others assign a billing method at interconnection. Ask your utility before installation.
Do I need a new meter for gross metering?
Often yes. Gross metering usually requires a second meter or a meter capable of recording imports and exports separately. Your utility will confirm what equipment is needed.
Conclusion
Net metering offsets your usage with the power you export, while gross metering pays for each side separately. Compare your annual import and export figures against your utility’s current rates before choosing. Tax, interconnection and billing questions can be complex, so consult your utility or a licensed solar installer before committing.
