Updated November 2026

Texas-new mexico power net metering is the arrangement that lets a home with solar panels send surplus electricity back to the grid and receive credit against the power it draws later. This guide explains how that credit works across the two states, what determines whether you qualify, and the steps to take before you energize a system. Because utility rules and interconnection terms vary, treat the details here as a starting point and confirm them with your provider.

Understand How Net Metering Credits Work

Under a standard net metering setup, your meter runs forward when you pull power from the grid and backward when your panels push surplus into it. At the end of each billing period, the utility nets those two flows together. If you exported more than you imported, you carry a credit forward. If you imported more, you pay for the difference.

Shopping for one? See our guide: Net Metering in Texas vs Selling Power to a Retailer: Which Should You Choose?.

The credit value matters as much as the mechanics. Some utilities credit exported energy at the full retail rate, while others credit it at a lower avoided-cost rate. Find out which applies to your account before you size a system, because it changes how quickly the panels pay back.

Check Your Eligibility and Interconnection Requirements

Most utilities require a signed interconnection agreement before you connect a system to the grid. Expect to provide the following:

  1. A site plan showing panel layout, roof orientation and the location of your main service panel.
  2. The inverter model and its certification, along with the total system capacity in kilowatts (kW) DC and kW AC.
  3. A single-line electrical diagram prepared or reviewed by a licensed electrician or engineer.
  4. Proof of ownership or landlord consent if the property is rented.

Systems above a utility-defined size threshold often face a longer review, so check that limit early. A licensed installer familiar with your utility’s process can catch paperwork gaps that cause delays.

Size Your System to Match Your Usage

Sizing is where many owners lose value. A system that produces far more than you use may generate credits you cannot fully apply, depending on your utility’s rollover and expiration rules. Pull twelve months of bills, add up your annual kilowatt-hour (kWh) use, and compare it to the expected annual output of the array.

Factor What to check
Annual usage Total kWh from the past 12 bills
Roof orientation South-facing roofs typically yield the most output in the Northern Hemisphere
Shading Trees and nearby structures reduce output during peak hours
Credit rules Rollover period and whether unused credit expires

Submit Your Paperwork and Verify the Final Setup

Once the utility approves your interconnection application, have the installer complete the work and request an inspection. Do not switch on the system until the utility authorizes it, since operating before approval can void the agreement. After activation, confirm that your meter is correctly configured to record both imported and exported energy. Check your next bill to make sure the export credit appears as expected.

Common Mistakes

  • Sizing the array for future needs you have not yet planned for.
  • Overlooking shading from trees that grow over time.
  • Assuming all exported energy is credited at the retail rate.
  • Energizing the system before receiving written utility approval.
  • Missing rollover or expiration deadlines for unused credits.

FAQ

Can I use texas-new mexico power net metering if I rent my home?

Possibly, but you need written permission from the property owner and the utility will require their signature on the interconnection agreement. Renters should confirm this before purchasing equipment.

What happens to credits I do not use in a billing cycle?

Many utilities roll unused credits forward to the next period, but some expire them after a set time. Check your tariff language to see which rule applies to your account.

Do I need a licensed electrician to connect my system?

In most cases yes, and utilities usually require inspection before approval. Consult a licensed professional and your utility before any electrical work.

Conclusion

Texas-new mexico power net metering can turn your surplus solar output into bill credits when the rules are understood and the paperwork is handled correctly. Start by confirming your credit structure and interconnection requirements, then size your array to your real usage. Verify utility approval before switching on, and review your first bills to confirm the credits are applied properly.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our home solar guides, checking product details against manufacturer specifications and owner feedback.