Updated November 2026

Solar panels on a north east facing roof will still generate electricity, but they produce less than panels on a south-facing roof. This guide shows you how to confirm your roof’s direction, estimate what kind of output to expect, and decide whether the layout is worth installing. The short answer is that a north east roof is usable in many cases, especially if you adjust tilt, accept a longer payback period, or pair the array with other sun-facing space.

Step 1: Confirm the Direction of Your Roof

Stand in the street or yard facing the roofline, then use a compass app on your phone. Note which slope of the roof points toward the bearing. A roof that faces northeast has its main surface pointing roughly between 0 and 90 degrees on the compass, with 45 degrees as the center. Be careful with the phone reading, since nearby metal and electronics can throw it off. Check the bearing with a second method, such as a satellite map view that shows the roof’s ridgeline.

Shopping for one? See our guide: Top 3 Solar Panels as Roof Shingles Compared for Homeowners.

Also note whether the slope is a single plane or split across multiple faces. A hip roof often has one face that points northeast and another that points east or north. You may find that only one of those faces is worth using.

Step 2: Estimate the Output Loss

In the Northern Hemisphere, a north-facing surface gets the least direct sun over the course of a day and year. A northeast surface gets morning sun, which is useful, but it misses most of the strong afternoon light. Solar tools such as the free NREL PVWatts calculator let you enter your address, tilt, and azimuth to model expected annual output. Run the model for your actual roof, then run it again for a south-facing version of the same roof so you can compare the two.

Expect a noticeable drop in production compared to a south-facing array. The exact figure depends on your latitude, shading, and tilt, so use the calculator rather than a rule of thumb.

Step 3: Adjust Tilt and Layout to Recover Output

The tilt angle matters more on a northeast roof than on a south one. A steeper pitch can help capture low-angle morning light, while a flatter pitch favors midday sun. If your roof pitch is steep and you are installing on a racked system rather than flush-mounted panels, you may be able to tilt the modules toward the south. Racked systems add wind load and cost, so confirm the design with your installer or a structural engineer before you commit.

Check how far each panel row sits from obstructions. Chimneys, dormers, and trees on the east side can cut morning output sharply. Map shading with a simple sun-path app or a shade-tracking tool at several times of day.

Step 4: Decide Whether the Roof Is Worth Using

Use this checklist before you buy hardware:

  1. Confirm the roof bearing and pitch with the tools above.
  2. Run a modeled annual output for the northeast face and a south-facing comparison.
  3. Check for shading between roughly 8 a.m. and noon.
  4. Inspect the roof’s age and condition. Replacing a roof soon after installing panels is expensive.
  5. Ask your utility how net metering or export credits work in your area, since lower output changes the payback math.
  6. Get at least two quotes that show the modeled output for your specific roof.

If the modeled output is still meaningful for your electricity use, a northeast roof can be a reasonable choice. If the numbers are weak, look at ground mounts or other roof faces before committing.

Common Mistakes to Avoid

  • Trusting a compass app without checking the roof bearing on a map.
  • Ignoring morning shade from trees or neighboring structures.
  • Assuming the same tilt that works on a south roof will work on a northeast one.
  • Skipping a roof condition check before mounting hardware.
  • Comparing quotes that use different output assumptions.

FAQ

Are solar panels on a north east facing roof worth it?

They can be, depending on your electricity use, utility rules, and the modeled output for your roof. Run the numbers for your specific site before deciding.

Do northeast panels work in winter?

They still generate power in winter, though total output is lower because days are shorter and the sun sits lower. Snow shedding and shading also affect winter production.

Should I tilt panels on a northeast roof?

A racked system can allow a different tilt, but it adds wind load and complexity. Consult a licensed installer or structural engineer before changing the mounting design.

Conclusion

Solar panels on a north east facing roof produce less than south-facing ones, but they can still make sense for some homes. Confirm your roof’s direction, model realistic output, and check shading and roof condition before buying equipment. Consult a licensed solar installer or structural engineer before any roof work.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our home solar guides, checking product details against manufacturer specifications and owner feedback.