Updated November 2026
Installing solar panels on north facing roof is possible, but it takes more planning than a south-facing install. In the Northern Hemisphere, a north-facing roof gets the least direct sun, so your goal is to squeeze as much output as you can from the available space. This guide walks through the site check, the layout decisions and the mounting steps so you know what to expect before you buy hardware.
First, Decide Whether a North Roof Is Worth Using
A north-facing array usually produces noticeably less energy than one facing south, so start by checking your alternatives. If you have a south, east or west slope, or a ground or pole mount option, those will almost always perform better. Our overview of Best Roof Direction for Solar Panels: South-Facing Roofs Win (2026 Guide) explains the output differences in more detail.
Shopping for one? See our guide: Top 3 Solar Panels as Roof Shingles Compared for Homeowners.
If a north slope is your only option, a north roof can still work, especially with a larger panel count, high-efficiency modules or a utility net metering arrangement that credits production over the year.
Check Pitch, Shading and Structure
Tilt matters more on a north roof because the panels are already facing away from the sun. Measure your roof pitch with a digital angle finder or a level and a tape measure (rise over a 12-inch run). Steeper tilts generally help northern arrays shed snow and capture low winter sun. Read Solar Panels Roof Pitch: How to Check and Plan the Right Angle (2026) for the calculation method.
Next, map shading from trees, chimneys and neighboring buildings across the day and through the seasons. Use a free solar pathfinder app or simply photograph the roof at different times of day.
Finally, confirm the roof can carry the added load. Look at the rafter size and spacing, and note any soft spots or past leaks. If the roof is aging, Roof Reinforcement for Solar Panels: How to Assess and Strengthen Your Roof covers what to inspect.
Plan the Layout and Mounting
Sketch the roof to scale, leaving clear setbacks from the edges and ridge as required by your local fire code. Then choose a mounting method. Rail-based systems with attachment flashings are common, and Roof Mounting Systems for Solar Panels: A Step-by-Step Guide (2026) compares the main types.
Installation Steps
- Locate rafters with a stud finder and mark them on the roof.
- Drill pilot holes, then install flashed mounts so each lag bolt hits a rafter.
- Seal around each flashing and confirm it sits flat under the shingles.
- Attach rails level and square, checking alignment every few feet.
- Clamp panels to the rails, leaving the manufacturer’s specified expansion gap.
- Route wiring through conduit and connect strings to the inverter, following the system diagram.
Wiring, Inspection and Permits
Wiring and interconnection carry real shock and fire risk. Many homeowners handle the mounting themselves but hire a licensed electrician for the DC wiring, breaker work and utility connection. Permits and inspections are usually required, and your utility will need approval before you can enable net metering. For more on the electrical side, see Roof Solar Panels DIY: A Step-by-Step Guide for Homeowners.
Recommended Gear
- Digital angle finder helps you measure roof pitch accurately before ordering racking. View on Amazon
- Cordless impact driver makes driving lag bolts into rafters faster and more consistent. View on Amazon
- Roof flashing sealant gives the penetrations a durable, weather-resistant seal. View on Amazon
Common Mistakes
- Skipping a shading study and assuming the north side is clear.
- Mounting flashings into the decking instead of rafters.
- Ignoring snow load and wind zone requirements for your area.
- Choosing a low tilt that lets snow and debris sit on the panels.
- Forgetting the manufacturer’s expansion gaps between panels and rails.
FAQ
Do solar panels work on a north-facing roof?
Yes, they produce electricity, but usually less than south-facing panels. Output depends on your location, tilt and shading.
What tilt is best for a north-facing array?
A steeper tilt often works better on a north roof, since it helps capture low sun and sheds snow. Check your installer’s recommendation for your latitude.
Can I install solar panels on a north roof myself?
Mounting is within reach for experienced DIYers, but wiring and utility interconnection should be handled by a licensed professional. Consult a qualified electrician and your local building department before starting.
Conclusion
Installing solar panels on north facing roof works best when you start with honest shading, pitch and structural checks. Plan the layout, use the right mounting hardware and get the electrical work inspected. A north roof may produce less than a south one, but with careful design it can still be a worthwhile addition to your home.
