Updated November 2026
Farmers looking into the cost of solar panel for agriculture usually want to know one thing first: which equipment fits a working farm, a barn, a well pump or a grain operation without overbuilding the system. This list compares six panel kits and modules that owners and installers commonly discuss for agricultural use. Each was assessed on panel type and efficiency, wattage per module, compatibility with 12V, 24V and 48V battery or inverter setups, weather and shade tolerance, the mounting and charge-controller details the listing states, and patterns in owner feedback about build quality and documentation. None of these were tested by us. The goal is to help you narrow down which type of system to research further.
Best overall: SUNGOLDPOWER 6x590W Bifacial Solar Panels – View on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| SUNGOLDPOWER 6PCS 590W Bifacial Solar Panels | Larger farm energy storage and backup | Bifacial N-type cells rated for 590W per module |
| SUNGOLDPOWER 590W Bifacial Solar Panel 6PCS | 24V and 48V home backup systems | Listed for 24V/48V on- and off-grid use |
| ECO-WORTHY 200W Solar Panel Kit | Small outbuildings, pumps and remote sheds | Complete kit with 30A PWM charge controller |
| SUNGOLDPOWER 450W Solar Panel 8PCS | Rooftop and barn installations | Eight-module array totaling 3600W |
| Monocrystalline Solar Panel 200W Bifacial | Garden and small farm off-grid loads | Shade-resistant design with 12V/24V output |
| 990W Bifacial Solar Panel 2PCS 495W | RV, marine and rooftop mounts | IP68-rated modules in a 990W combined array |
SUNGOLDPOWER UL61730 N-Type 6PCS 590W Bifacial Solar Panels
SUNGOLDPOWER UL61730 N-Type 6PCS 590W Bifacial Solar Panels,16BB High Efficiency Monocrystalline Solar Panel for Energy Storage,Charging Station, Household,On/Off Grid Solar System (6x590W Bifacial)
Best for: Larger agricultural energy storage and whole-farm backup loads
This six-module bifacial array suits a farm owner planning a battery bank and inverter sized for pumps, lighting, refrigeration and workshop equipment. The per-module wattage keeps the number of mounting points and wiring runs manageable for a ground or barn-roof array.
Key specs
- Six modules at 590W each (3540W total, per the listing)
- Monocrystalline, 16BB cell layout
- Listed for on-grid, off-grid and energy storage use
Pros
- High wattage per module reduces the number of connections
- Bifacial design can add output from reflected ground light
- Suits battery-backed systems sized for farm loads
Cons
- Large array needs a sturdy ground or roof mount and a qualified installer
- Requires an inverter and battery bank sized to match, which adds to the total outlay
Bottom line: A good fit for farms that already know their daily load and want a large, expandable array.
SUNGOLDPOWER 590W Bifacial Solar Panel 6PCS, N-Type 16BB
SUNGOLDPOWER 590W Bifacial Solar Panel 6PCS,N-Type 16BB,High Efficiecy Up to 30% Extra Power,Vmp 44.4V/PCS,for 24V/48Vdc Home Backup,Energy Storage,On Grid/Off-Grid System UL61730 (6 * 590W Bifacial)
Best for: 24V and 48V backup systems on farms with separate DC loads
This six-panel set is aimed at owners who want a 24V or 48V battery architecture, which is common for larger pumps and DC equipment. Its UL61730 labeling is useful when a local inspector or utility asks for listed equipment.
Key specs
- Six modules at 590W each, per the listing
- Rated for 24V and 48V DC home backup and energy storage
- N-type cells with a 16BB layout
Pros
- Voltage compatibility matches common farm battery banks
- UL61730 listing supports code-compliance conversations
- High per-module output keeps wiring compact
Cons
- Higher system voltage raises the importance of correct string design and fusing
- Still needs a separate controller, inverter and mounting hardware
Bottom line: Best for owners who plan a 24V or 48V system and will have an installer verify string voltages.
ECO-WORTHY 200 Watts 12 Volt/24 Volt Solar Panel Kit
ECO-WORTHY 200 Watts 12 Volt/24 Volt Solar Panel Kit with High Efficiency Monocrystalline Solar Panel and 30A PWM Charge Controller for RV, Camper, Vehicle, Caravan and Other Off Grid Applications
Best for: Small outbuildings, livestock water pumps and remote sheds
This kit bundles panels with a 30A PWM charge controller, which makes it one of the simpler entry points for a small agricultural load. It suits off-grid use where the total daily demand is modest.
Key specs
- 200W total output in a 12V or 24V kit
- Includes a 30A PWM charge controller
- Monocrystalline modules
Pros
- Complete kit reduces the number of parts to source
- Good match for 12V pumps, lights and small electronics
- Straightforward to expand later with more panels
Cons
- Output is too small for whole-farm or irrigation-scale loads
- PWM controllers are less efficient than MPPT types in cold or low-light conditions
Bottom line: A practical starting point for small off-grid agricultural loads, not a full farm system.
SUNGOLDPOWER UL61730 450W Solar Panel 8PCS, Monocrystalline
SUNGOLDPOWER UL61730 450W Solar Panel 8PCS,Monocrystalline,Class A Cell,Rigid,High Efficiency,Charging 12V/24V/48V Solar System,for Rooftop,Farm,On and Off Grid,CEC Listed(Total 3600W)
Best for: Rooftop and barn installations with a fixed array footprint
Eight 450W modules add up to a 3600W array, a size that fits a pole barn, machine shed or equipment building roof. The CEC listing is relevant for owners in jurisdictions that reference California Energy Commission approval.
Key specs
- Eight modules at 450W each (3600W total)
- Monocrystalline, Class A cells, rigid frame
- Supports 12V, 24V and 48V charging systems, per the listing
Pros
- Good total wattage for a mid-size farm building
- CEC listing is helpful for permitting discussions
- Rigid frames suit standard roof and ground racking
Cons
- Eight modules require a larger roof area and more racking
- Roof load and wind rating should be checked by a structural professional
Bottom line: A solid choice for a barn or shed roof where the array size is already known.
Monocrystalline Solar Panel, Shade Resistant 200 Watt Bifacial
Monocrystalline Solar Panel, Shade Resistant Design, A+ Grade Solar Cells for Residential Farm Garden Off Grid Home 200 watt Bifacial Solar Panel, 12V/24V N-Type 25% High Efficiency
Best for: Garden, greenhouse and small farm off-grid loads
This 200W bifacial module is marketed with a shade-resistant design, which matters on farms where trees, poles or equipment cast partial shadows. It fits small 12V and 24V setups.
Key specs
- 200W bifacial monocrystalline module
- 12V/24V compatible, per the listing
- Shade-resistant cell design
Pros
- Shade-resistant design helps in partly shaded locations
- Good size for greenhouse fans, pumps and lighting
- Bifacial output can add yield over reflective surfaces
Cons
- Single module offers limited output for larger loads
- Owners report the need to verify specifications directly with the seller before purchase
Bottom line: Suited to smaller agricultural loads where partial shading is a concern.
990W Bifacial Solar Panel 25.6% High-Efficiency 16BB Monocrystalline
990W Bifacial Solar Panel 25.6% High‑Efficiency 16BB Monocrystalline 48V/24V, Reliable Power for RV/Marine/Roof, IP68 STAR 990W Bifacial Solar Panel, 2PCS 495W UL61730 N-Type Solar Panels
Best for: RV, marine and rooftop mounts where weight and weatherproofing matter
This 990W kit uses two 495W modules and emphasizes IP68 rating and efficiency. It is more often seen on mobile and marine setups, but the weatherproof rating may appeal to farm owners in wet or dusty conditions.
Key specs
- Two modules at 495W each (990W total)
- Stated efficiency of 25.6% in the listing
- IP68-rated, 48V/24V compatible per the listing
Pros
- High efficiency per square foot of array
- Weatherproof rating suits dusty or wet environments
- Compact footprint for a sub-1kW array
Cons
- Only two modules, so expansion means buying more matched units
- Marine and RV focus means farm mounting hardware is usually separate
Bottom line: A reasonable pick for a compact, weather-hardened array on a shed, trailer or equipment building.
Buying Guide
System Size and Daily Energy Load
Before comparing panels, total the daily watt-hours your equipment uses. Pumps, grain dryers, refrigeration and welders have very different demands. Multiply each device’s running watts by its daily run hours, then add a margin for cloudy days. This number drives the array size, which is the largest part of the cost of solar panel for agriculture.
Good picks for this: SUNGOLDPOWER 6PCS 590W Bifacial Solar Panels, SUNGOLDPOWER 450W Solar Panel 8PCS
Voltage Compatibility (12V, 24V, 48V)
Check the battery bank and inverter voltage first, then match the panel string design to it. Mismatched voltage is one of the most common causes of underperformance and equipment damage. Higher-voltage systems usually reduce wire size and loss over long runs to outbuildings.
Good picks for this: SUNGOLDPOWER 590W Bifacial Solar Panel 6PCS, ECO-WORTHY 200W Solar Panel Kit
Panel Type and Efficiency
Monocrystalline modules generally offer higher efficiency per square foot than polycrystalline, which matters when roof or ground space is limited. Bifacial panels can capture reflected light from the ground or a light-colored surface, though their gain depends on mounting height and surface reflectance.
Good picks for this: 990W Bifacial Solar Panel 25.6% High-Efficiency, Monocrystalline Solar Panel Shade Resistant 200 Watt Bifacial
Certifications and Listings
Look for UL61730 or other recognized safety listings, and check whether your state or utility requires a specific certification such as CEC listing. Certifications do not guarantee performance, but they make permitting and inspections smoother.
Good picks for this: SUNGOLDPOWER UL61730 N-Type 6PCS 590W, SUNGOLDPOWER UL61730 450W Solar Panel 8PCS
Mounting and Structural Fit
Measure the roof or ground area and confirm the structure can carry the added load, including wind and snow. Ground mounts avoid roof penetrations but need trenching and secure footings. A structural engineer or licensed installer should confirm the design for barns and older buildings.
Good picks for this: SUNGOLDPOWER UL61730 450W Solar Panel 8PCS, SUNGOLDPOWER UL61730 N-Type 6PCS 590W
Weather, Shade and Durability
Farm sites face dust, hail, livestock, tree shade and wide temperature swings. Look for IP-rated enclosures, shade-tolerant cell designs and frame and glass specifications. Inspect mounts and wiring each season, since loose connections are a frequent source of failure.
Good picks for this: 990W Bifacial Solar Panel 25.6% High-Efficiency, Monocrystalline Solar Panel Shade Resistant 200 Watt Bifacial
Expansion and Future Loads
Choose a platform that lets you add modules later, and confirm the charge controller and inverter can handle the larger array. Buying a kit that cannot be expanded can force a full replacement when the farm adds equipment.
Good picks for this: ECO-WORTHY 200W Solar Panel Kit, SUNGOLDPOWER 590W Bifacial Solar Panel 6PCS
FAQ
What drives the cost of solar panel for agriculture the most?
The biggest drivers are the total daily energy load, the number of panels needed, the battery and inverter capacity, the mounting method and any electrical work that requires a licensed electrician. Site conditions such as trenching distance and roof structure also matter.
Can I use a panel kit for a whole farm?
Small kits suit outbuildings, pumps and lighting. Whole-farm loads usually require a larger array, a battery bank and an inverter sized by a professional load calculation.
Do I need a permit for a farm solar array?
Many counties and states require electrical permits and inspections for solar installations. Check with your local building department and, if you plan to connect to the grid, your utility.
Is a 12V or 24V system better for agriculture?
Neither is universally better. 12V suits small loads and simple kits. 24V and 48V reduce current and wire size for larger systems, which often suits farm-scale work.
How do bifacial panels help on a farm?
Bifacial panels can capture some reflected light from the ground or a bright surface behind them. The added yield depends on mounting height, ground reflectance and orientation, so the benefit varies from site to site.
Should I hire a professional installer?
For anything beyond a small off-grid kit, a licensed electrician or solar installer is strongly recommended. Improper wiring can cause fires and equipment damage. Consult a qualified professional before connecting any system to your building or the grid.
Conclusion
For a whole-farm or larger building system, the SUNGOLDPOWER 6PCS 590W bifacial array and the 8PCS 450W rooftop set are the most relevant starting points, depending on whether you plan a 24V/48V battery bank or a fixed roof array. For a small outbuilding, pump or greenhouse, the ECO-WORTHY 200W kit and the 200W shade-resistant bifacial module are more appropriate. The 990W two-module kit suits compact, weather-hardened mounts. In every case, the true cost of solar panel for agriculture depends on your load calculation, structure and installation work, so confirm the design with a qualified professional before buying.
Sources
- Federal guidance on residential and commercial solar system design, incentives and planning (energy.gov)
- Research data on solar resource, panel performance and system sizing (nrel.gov)
- Agricultural energy programs and conservation support for farm renewable projects (usda.gov)
