Updated November 2026
Planning to install solar panels on old roof surfaces takes more care than a new build, because aging shingles, soft decking and worn flashing all affect how the array is attached. This list compares three mounting kits that homeowners often consider for older roofs. We judged each one on roof-type fit, weatherproofing materials, the amount of hardware included and how well the parts suit a DIY install.
Our top picks at a glance
- 1
TOP CHOICEBest overallAluminum Waterproof Complete Solar Panel Mounting KitView on Amazon - 2
Best for asphalt shingle roofsSolar Flashing Mount L Bracket KitView on Amazon - 3
Best for metal and sheet roofsAluminium Alloy Solar Panel Brackets KitView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Aluminum Waterproof Complete Solar Panel Mounting Kit | Metal and flat roofs | Rails for 4–5 panels |
| Solar Flashing Mount L Bracket Kit | Asphalt shingle roofs | EPDM gaskets included |
| Aluminium Alloy Solar Panel Brackets Kit | Sheet and tin roofs | Mid clamps for Unistrut |
Aluminum Waterproof Complete Solar Panel Mounting Kit
Aluminum, Waterproof, Complete Solar Panel Mounting Kit, Weather Resistant, For Metal Roof Tin Roof Flat Roof Sheet Roof Solar Panel Roof Mounting Kit for 4-5 Solar Panels, 8 x 47.2 in Rails
Best for: Metal and flat roofs where a full rail system is needed.
This kit suits homeowners with a metal, tin or flat roof who want rails already matched to a 4–5 panel layout. The listing describes it as weather resistant, which matters for an older roof that already sees heavy exposure.
Pros
- Rails sized for 4–5 panels (8 x 47.2 in)
- Aluminum construction resists corrosion
Cons
- Less suited to shingle roofs without extra flashing
Solar Flashing Mount L Bracket Kit
Solar Flashing Mount, Aluminum L Bracket, Waterproof Pv Module Roof Racking, Asphalt Shingle Roof with Epdm Gasket Hardware 8 Pack Solar Panel Roof Mounting Kit L Bracket 12" X 8.1"
Best for: Asphalt shingle roofs that need sealed attachment points.
Owners of asphalt shingle roofs often report that flashing-style mounts are easier to seal than surface brackets. This eight-pack includes EPDM gaskets, which help limit water entry at each penetration.
Pros
- EPDM gaskets included with the hardware
- Eight brackets cover a typical small array
Cons
- Each penetration still needs careful sealing and rafter location
Aluminium Alloy Solar Panel Brackets Kit
Aluminium Alloy Solar Panel Brackets, Waterproof, Solar Panel Mounting Kit for Metal Roof, Tin Roof, Flat Roof, Sheet Roof 10pcs Solar Panels Mid Clamps for Unistrut , 40mm, Black
Best for: Sheet and tin roofs that use clamp-style mounting.
This kit is built around mid clamps, which suit standing-seam or sheet metal profiles on an older roof. It is also compatible with Unistrut channel, useful for ground or ballast layouts.
Pros
- Mid clamps fit sheet and tin roof profiles
- Works with standard Unistrut channel
Cons
- Clamp fit depends on matching the seam profile exactly
Buying Guide
Check your roof material first
Asphalt shingle, metal and tile each need a different attachment method. Mismatched hardware is a common source of leaks on older roofs.
Confirm rafter locations and decking strength
Mounts should anchor into rafters, not just decking. Older roofs may have sagging or rotted boards, so have the structure inspected before you drill.
Match rail or clamp length to your panels
Measure your panel frame width and confirm the rail or clamp spacing. A kit sized for a different module will leave gaps or force awkward mounting.
Plan the weatherproofing
Every penetration is a potential leak. Look for gaskets, flashing and sealant rated for outdoor exposure, and plan to reseal as the roof ages.
Good picks for this: Solar Flashing Mount L Bracket Kit, Aluminum Waterproof Complete Solar Panel Mounting Kit
FAQ
Can I install solar panels on an old roof?
Often yes, but the roof must be structurally sound and have enough remaining life to support the array for decades. Have a roofer or structural engineer evaluate it first.
Should I replace the roof before installing panels?
If the shingles are near the end of their life, replacing the roof before mounting is usually simpler than removing panels later. Panel removal for a roof replacement is a significant job.
Is a DIY mount install safe on an older roof?
Roof work carries fall and structural risks, and mistakes can cause leaks. Consult a licensed roofing or solar professional before drilling into an older roof.
For more background, see Roof Mounting Systems for Solar Panels: A Step-by-Step Guide (2026), Roof Reinforcement for Solar Panels: How to Assess and Strengthen Your Roof, Issues with Solar Panels on Roof: 7 Common Problems and How to Fix Them and Best Roof Material for Solar Panels: What Works and Why (2026).
Conclusion
For a metal or flat roof, the complete aluminum kit is the most straightforward starting point. Asphalt shingle roofs benefit from the flashing-style L brackets with gaskets, while sheet and tin roofs suit the clamp-based kit. Confirm your roof type and rafter layout before choosing.
Sources
- Guidance on residential solar installation and system planning (energy.gov)
- Research on rooftop photovoltaic systems and mounting (nrel.gov)
- Fall protection and safety rules for rooftop work (osha.gov)
