Updated November 2026

The cps net metering program lets homeowners with rooftop or ground-mounted solar send surplus electricity back to the grid and receive bill credits for it. This guide explains how the credits work, what paperwork you need, and how to avoid the delays that catch many new solar owners. By the end, you’ll know how to set up your system for net metering and check that your credits show up correctly.

How CPS Energy Net Metering Credits Work

Under net metering, your solar system is connected to the same meter as your home. During daylight hours, your panels usually produce more power than the house uses. That extra energy flows onto the grid and spins the meter backward, and the utility records it as a credit. At night, or on cloudy days when production drops, you draw power from the grid as normal and your credits offset the charges.

Shopping for one? See our guide: PPL Net Metering Program vs Standard Grid Export: Which Should You Choose?.

Check your current service agreement and tariff sheet for the exact rate your credits are valued at. Utilities differ on whether excess generation is credited at the full retail rate or a lower avoided-cost rate, and this difference shapes how much your system is worth to you.

Steps to Apply and Get Credited

  1. Confirm your home is in the utility’s service territory and that your system size falls within the program’s kilowatt limits.
  2. Gather your recent utility bills, your meter number, and the installer’s system specifications, including panel count, inverter model, and total DC capacity.
  3. Submit an interconnection application before installation. Most utilities will not approve a system that was already energized without review.
  4. Wait for written approval, then schedule the inspection and the utility’s meter exchange, if one is required.
  5. After permission to operate is granted, watch your first two or three bills to confirm that export credits appear as expected.

Key Factors That Affect Your Credits

Three things determine how much your system earns under the program: system size, how much of your production you use on site, and the rate applied to exported energy. A system sized close to your annual usage typically produces the most useful credits. An oversized system may generate credits you can’t use before they expire or roll over.

Factor Why it matters
System size (kW DC) Sets the program limit and total annual output
Self-consumption Power used on site avoids the export question entirely
Export rate Determines the value of each kWh you send to the grid
Billing cycle Credits are applied on a set schedule, not instantly

Tips and Common Mistakes

  • Don’t install before approval. Starting work early is one of the most common reasons applications get delayed.
  • Keep your inverter and panel specs on file. Mismatched paperwork causes more holds than almost any other issue.
  • Check your first few bills closely. Credit lines are easy to miss if you aren’t looking for them.
  • Recheck your usage pattern after adding an EV or heat pump. Higher daytime or nighttime load changes your credit balance.
  • Ask the utility how unused credits are handled at year end, since rollover rules vary.

A basic clamp-style energy monitor helps you see in real time how much power your panels produce versus how much your home uses, which makes it easier to predict export and check your bill. View on Amazon

A standalone kWh meter lets you measure individual appliances, so you can see which loads cut into your exported surplus. View on Amazon

FAQ

Do I need a new meter for the cps net metering program?

Many systems require a bidirectional meter that records power flowing both into and out of your home. Your utility will tell you during the interconnection review whether a replacement is needed.

What happens to credits I don’t use in a month?

Credits generally carry forward to the next billing period. Check your tariff for the annual true-up rules, since unused balances may be paid out or expire at a set point.

Can I change my system size after approval?

Any change usually requires a new or amended interconnection application. Contact the utility before adding panels or upgrading the inverter.

Conclusion

The cps net metering program can make a home solar system pay off by turning daytime surplus into bill credits. Apply before you install, size your system to your real usage, and review your bills for the first few cycles. For complex roof layouts or tariff questions, consult a licensed solar installer or your utility’s customer program staff.

Claire Whitaker

About Claire Whitaker

Claire Whitaker is part of our editorial team and reviews and edits our home solar guides, checking product details against manufacturer specifications and owner feedback.